No products
Prices are tax included
-
0.6mm Brass Nozzle for Volcano 1.75mm hot end
0.6mm Hot end nozzle for E3D Volcano...
4,80 € -20% 6,00 €
-30% There are 33 products.
Screw M6X12mm Hex head Zinc Steel 8.8
Allen screw: Steel 8.8 White zinc Full thread Din 912 M6x12mm
0,08 € 0,11 € -30%Reduced price!In StockPack heatbed for Scalar XL 3D printer...
Heatbed Pack for Scalar XL 3D printer Contains 2 aluminum plates (3mm thick) laser cut with fixation holes 1 silicone heatter (700w-220V) 1 thermistor 1 static relay Free 1 set of nuts and bolts: 4 spacers 4 conic head screws 4 nuts for conic screws 10 M6x12mm screws 20 M3 washers 10 nylstop nuts
104,99 € 149,99 € -30%Reduced price!Out of stockPack heatbed for Scalar S 3D printer...
Heatbed Pack for Scalar S 3D printer Contains: 2 aluminum plates laser cut with fixation holes (1 top plate 3mm thick, 1 bottom plate 2mm thick) 1 silicone heatter (250W-220V) 1 thermistor 1 static relay + Wires Free: 1 set of nuts and bolts: 4 springs 4 conic head screws 4 nuts for conic screws 4 M6x12mm screws 4 M3 washers 4 nylstop nuts
68,95 € 98,50 € -30%Reduced price!Out of stockUpgrade Scalar S - Tiges trapézoïdales (kit)
34,30 € 49,00 € -30%Reduced price!Product available with different optionsScalar S Upgrade - Dual Drive System kit
Key features: Dual Drive System The bed will have 2 driving points on the sides of the bed instead of only 1 in the middle of it. Linear motion on 2020 aluminum extrusions Increases: The maximum payload (max weight of heatbed) Print quality Bed stabilityNo firmware change
42,00 € 60,00 € -30%Reduced price!In Stock[1.75] HIPS Black 1kg - 3DMS
3D Modular Systems Filament HIPS 1.75mm 1Kg - Black
20,93 € 29,90 € -30%Reduced price!In stockUpgrade Dual Y motor for Scalar L and XL...
This upgrade intends to add a 2nd stepper motor on the Y axis. This increase the stability of the belts of the dual drive system. It also reduces the vibrations on the belts.
17,46 € 24,94 € -30%Reduced price!Out of stockTMC2130 Silent stepper motor driver
Stepper Motor Driver based on a Trinamic TMC2130 with soldered pin headers Controls pins soldered upward
9,53 € 13,62 € -30%Reduced price!In Stock0.4mm Stainless Steel cone tip Nozzle for...
0.4mm Stainless Steel Hot end nozzle for E3D Volcano 3D printer's Hot ends: Threading: M6 Nozzle diameter: 0.4mm Material: Stainless Steel Cone fine tip Compatible with E3DV6 Volcano 1.75mm hot end
7,70 € 11,00 € -30%Reduced price!In Stock1.0mm Stainless Steel Nozzle for Volcano...
1.0mm Stainless Steel Hot end nozzle for E3D Volcano 3D printer's Hot ends: Threading: M6 Nozzle diameter: 1.0mm Material: Stainless Steel Compatible with E3DV6 Volcano 1.75mm hot end
7,00 € 10,00 € -30%Reduced price!In Stock0.4mm Stainless Steel Nozzle for Volcano...
0.4mm Stainless Steel Hot end nozzle for E3D Volcano 3D printer's Hot ends: Threading: M6 Nozzle diameter: 0.4mm Material: Stainless Steel Compatible with E3DV6 Volcano 1.75mm hot end
7,00 € 10,00 € -30%Reduced price!In Stock0.6mm Stainless Steel Nozzle for Volcano...
0.6mm Stainless Steel Hot end nozzle for E3D Volcano 3D printer's Hot ends: Threading: M6 Nozzle diameter: 0.6mm Material: Stainless Steel Compatible with E3DV6 Volcano 3mm hot end
7,00 € 10,00 € -30%Reduced price!In Stock
![[1.75] HIPS Black 1kg - 3DMS](http://3dmodularsystems.com/3045-home_default/-175-hips-black-1kg-3dms.jpg "[1.75] HIPS Black 1kg - 3DMS")
