Large silicone heater for RepRap 3D...
Connectors for DIY 3D printers kit
Quantity: 1 piece Compatible with Jack DC plugs 2.5mm x 5.5mm x 9mm Length: 17mm 12V 3A Max Short Pin = Positive pin Required hole: 7.8mm Provided with the fixation nut Exposed part: 4mm high,10mm diameter 13mm deep is required behind the pannel
Twin Wire 24 AWG (diametre 0.5106mm, area 0.2047mm²) 2 wires (red and black) Sold by linear meter Used to increase fan lead wires or to wire 3D printers end stops.. Can be used on any application requirering less than 500mA current
Spare part : 4 Pins connector Connector compatible with Ramps 1.4 power terminals Pluggable terminals Compatible with Ramps 1.4 Has 4 terminals Bas pins are 90° angle Supports 10A max under 300VAC Compatible with wires AWG 12-24 / 2.4mm diametre - 0.6mm diametre/ 3mm² -0.2mm² (source)
Pair of terminalsColor: Black+ Green Material: ABS Perfect for CCTV security cameras power plugs Easy to install Male and female connector format : 5.5x2.1mm Provided terminals: Male + Female 12V Compatible Max Current: 1 to 2A