No products
Motors
New products
-
MKS-SGen 32Bits Controler board for 3d printer
MKS SGEN 3D printer 32bits controler board LPC1769 Cortex-M3 32bits...
48,03 € -
MKS-SGen_L 32Bits Controler board for 3d printer
MKS SGEN L 3D printer 32bits controler board LPC1769 Cortex-M3 32bits...
23,75 € -
0.4mm Brass Nozzle for 1.75mm hot end CR-X
Hot end nozzle of 3D printers: Threading: M6 Nozzle diameter: 0.4mm...
5,00 € -
TMC2209 Silent Stepper motor driver
Stepper Motor Driver based on a Trinamic TMC2209 with soldered pin headers
10,52 € -
-
-
-
Full aluminium plate kit (3mm thick) 33x30cm
Pack of 2 aluminum plates 3mm thick...
39,33 € -20% 49,17 €
Stepper motors for DIY reprap 3D printer
Motors There are 9 products.
Subcategories
Stepper motors
Stepper motors
5 Nema 17 Stepper motor for Scalar Family...
This pack contains 5 NEMA17 stepper motors compatible with Scalar 3D printers. Powerful, robust, with a nice capacity to stay cool thanks to it's 40mm high and limited 1.2A per phase; Uses only 1.2A for a 4000 g.cm torque (0.44 Nm ou 62 Oz.In) It contains: 5 motors with 1m lead wires and a 4 pin female dupont connector
65,42 €In StockNema 17 KS42STH40 Stepper motor for Scalar...
1 NEMA17 stepper motors compatible with Scalar 3D printers. Powerful, robust, with a nice capacity to stay cool thanks to it's 40mm high and limited 1.2A per phase; Uses only 1.2A for a 4000 g.cm torque (0.44 Nm ou 62 Oz.In)
13,75 €In stock !Nema 17 2mm Cork gasket vibration dampener
Nema 17 cork gasket Vibration dampener Size: 42x42x2mm Material: Cork Compatible with Nema 17 stepper motor Sold by unit Stepper motor not included
0,75 €In StockNema 17 Vibration Dampener
Vibration dampener for Nema 17 Stepper motor Size: 52x52x6mm Compatible with Nema 17 stepper motor
1,50 €In StockNema 17 (42HM48), 400 steps / turn, 0.9° /...
1 NEMA17 stepper motors compatible with Scalar 3D printers. Powerful, robust, with a nice capacity to stay cool thanks to it's 40mm high and limited 1.2A per phase; Uses only 1.2A for a 4000 g.cm torque (0.44 Nm ou 62 Oz.In)
20,42 €In stock !Makerbase MKS SERVO42 closed loop motor
Moteur à boucle fermé avec encodeur magnétique Simple à installer Ecran de contrôle / paramétrage OLED fourni Configurable en 16/32/64/128/256 micros pas Courrant max 2A en pointe Tension d'entrée: 12-24V DC Précision: 0.1125 degrés
39,92 €In Stock
