No products
New products
-
MKS-SGen 32Bits Controler board for 3d printer
MKS SGEN 3D printer 32bits controler board LPC1769 Cortex-M3 32bits...
48,03 € -
MKS-SGen_L 32Bits Controler board for 3d printer
MKS SGEN L 3D printer 32bits controler board LPC1769 Cortex-M3 32bits...
23,75 € -
0.4mm Brass Nozzle for 1.75mm hot end CR-X
Hot end nozzle of 3D printers: Threading: M6 Nozzle diameter: 0.4mm...
5,00 € -
TMC2209 Silent Stepper motor driver
Stepper Motor Driver based on a Trinamic TMC2209 with soldered pin headers
10,52 € -
-
-
-
Full aluminium plate kit (3mm thick) 33x30cm
Pack of 2 aluminum plates 3mm thick...
39,33 € -20% 49,17 €
Stepper motors
Stepper motors There are 9 products.
5 Nema 17 Stepper motor for Scalar Family...
This pack contains 5 NEMA17 stepper motors compatible with Scalar 3D printers. Powerful, robust, with a nice capacity to stay cool thanks to it's 40mm high and limited 1.2A per phase; Uses only 1.2A for a 4000 g.cm torque (0.44 Nm ou 62 Oz.In) It contains: 5 motors with 1m lead wires and a 4 pin female dupont connector
65,42 €In StockNema 17 KS42STH40 Stepper motor for Scalar...
1 NEMA17 stepper motors compatible with Scalar 3D printers. Powerful, robust, with a nice capacity to stay cool thanks to it's 40mm high and limited 1.2A per phase; Uses only 1.2A for a 4000 g.cm torque (0.44 Nm ou 62 Oz.In)
13,75 €In stock !TL-Smoother for DRV8825 stepper motor
TL-Smoother, specially designed to smooth out and rectify the signal from 3D printer stepper motor drivers. Specially designed for DRV8825 Also compatible with other stepper motor drivers such as A4988, etc...
5,00 €In StockNema 17 2mm Cork gasket vibration dampener
Nema 17 cork gasket Vibration dampener Size: 42x42x2mm Material: Cork Compatible with Nema 17 stepper motor Sold by unit Stepper motor not included
0,75 €In StockNema 17 Vibration Dampener
Vibration dampener for Nema 17 Stepper motor Size: 52x52x6mm Compatible with Nema 17 stepper motor
1,50 €In StockNema 17 (42HM48), 400 steps / turn, 0.9° /...
1 NEMA17 stepper motors compatible with Scalar 3D printers. Powerful, robust, with a nice capacity to stay cool thanks to it's 40mm high and limited 1.2A per phase; Uses only 1.2A for a 4000 g.cm torque (0.44 Nm ou 62 Oz.In)
20,42 €In stock !Makerbase MKS SERVO42 closed loop motor
Moteur à boucle fermé avec encodeur magnétique Simple à installer Ecran de contrôle / paramétrage OLED fourni Configurable en 16/32/64/128/256 micros pas Courrant max 2A en pointe Tension d'entrée: 12-24V DC Précision: 0.1125 degrés
39,92 €In Stock
