Main caracteristics: 12V, 0.52A...
Ceramic screw diver. Great tool to adjust various kind of electronic device sensitive to Electro static dischanges such as Steper motor drivers. Model: CD-20 Type: Flat screw diver Width: 1.8mm Diameter: 0.4mm Ideal for 3D printer stepper drivers Warning: Can break easily
This dust filter is an easy, economic and easy to maintain solution to filter big and average dust particules that will stick on your equipments or electronic boards. Can easily be fixed on the input of any 80mm fan. The dust will stick on the filter grid by it's own. A small paper sheet can be used to clean the filter once in while.
Black PTFE tube for 3D printer filament This tube is ideal for Bowden type systems used to guide the plastic from the extruder up to the hot end. Internal diameter: 4mm Outer diameter: 6mm Compatible with 3mm filament. 1 meter long
Push to fit pneumatic straight connector for bowden type PTFE tubes. Compatible with 6mm tubes for 3mm filaments. Thread: 1/8 " BSPT Thread type: NPTF conical Quick connector Can handle up to 10 bars of pressure material: Acetal Certifications: FDA and NSF
Push to fit pneumatic straight connector for bowden type PTFE tubes. Compatible with 4mm OD tubes for 1.75mm filaments. Thread: 1/8 " BSPT Quick connector Can handle up to 10 bars of pressure material: Plastic + brass
Pair of terminalsColor: Black+ Green Material: ABS Perfect for CCTV security cameras power plugs Easy to install Male and female connector format : 5.5x2.1mm Provided terminals: Male + Female 12V Compatible Max Current: 1 to 2A
Default 40W 12V Heater cartridge for RepRap HotEnds Will boost the heatting time of your hotend such as E3D V6 that are provided with 25W heater cartridge Dimentions is standard for all hot ends using Heater cartridge. Wire length: 1 meter
Heatsink specilly made for stepper drivers such as A4988 or DRV8825. Size: Width: 9mm Length: 9mm Height: 5mm Provided with 3M tape so you can stick the heatsink on top of the stepper driver chipset.