The Scalar S, has a print volume of 20 x 20 x 20 cm.
Shipping within 2/4 days
Warning: Last items in stock!
Scalar's 3D printers are shipped including a sample of PLA.
You can add 1Kg of (PLA) 1.75 or 3mm (depending on the hotend you choose) (Tennis ball system not included) at a preferred price.
We will provide certain screws and bearing already mounted on the plastic parts. The electronic is already programmed and the hot end is already assembled.
Then have a great time assembling your printer using our online documentation
Contact us if you have any issues regarding your kit ==> email@example.com
You select chat model you want depending on your usage.
1.75mm hot ends are :
Hot ends for 3mm filaments are :
The LCD screen is a standard screen with one button on the side to control de printer (include SD card slot and 4go SD card)
The touch screen allow to control the printer easily. (incluse USB port, SD port and 4go SD card)
All the Scalar 3D printer are equipped with Auto ed leveling sensors (Inductive probe)
This sensor will probe the proximity of the heat bed using up to 9 points before each print.
This will allow to compensate any heat bed deformation or miss alignments.
The heat bed is made using 2 aluminum plates of about 3mm thick.Springs are provided for you to adjust each corner height as you please.
A dual belt synchronization system is provided in order to get more stability from your heat bed.
The 250W, 220V Heat bed ( with EU power plug => this one can be changed), allows to reach 60°C in less than 60 seconds and 110°C in less than 3 minutes)
Check out the study we made on the Scalar XL on our blog
The machine is provided with 1 single blower fan at the front of the machine. The 2nd blower fan allows a better cooling of your plastic part being printed. (very useful for PLA)
Every parts of the printer is available on our thingiverse page.
The firmware is a generic version of Marlin, It's pre-loaded inside the printer controller.
It is highly recommended to equip your printer with a hood for capturing micro particles created during printing, and an air exhaust system outwards.
If it is not the case, it is advisable to place the printer in a room where you do not stay when printing.
It is imperative to ventilate the room, at least after each print to recycle the air.
We strongly recommend the PLA, a biodegradable plastic and 10x less dangerous than the ABS, which potentially release toxic gases such as carbon monoxide and hydrogen cyanide when printing.
|Stepper drivers resolution||16 micro steps|
|Print size (lxWxH)||20cm x 20cm x 20cm|
|Stepper drivers||5X A4988|
|Printer size (lxWxH)||47cm x 36cm x 54cm|
|Operating temperature||10-30°C (50 - 86°F)|
|Layer thickness||from 50 microns up to 1/2 nozzle size|
|Heat Bed support||En option|
|Print surface material||3mm Aluminum|
|Heat Bed safety thermal fuse||Yes, calibrated to 140°C (284°F)|
|Heat bed insulation||Yes|
|Heat bed power supply voltage||220V AC|
|HeatBed heat time PLA 25°C-60°C (77°F-140°F)||1 minute|
|HeatBed heat time PLA 25°C-110°C (77°F-230°F)||3 minutes|
|Recommended nozzle size||0.4mm|
|Supported plastic types||PLA, ABS|
|Supported Filament diameter||1.75mm or 2.85/3mm|
|Auto bed Leveling||Yes - by Inductive probe|
|Thermal Runaway safety||Yes - Handled by firmware|
|Virtual end stops||Yes - MAX End stops are virtual|
|Chassis structure||Aluminium Extrusion 20x20mm|
|SD card reader||Yes - Integrated to the LCD display|
|LCD display||Yes - 20x4 characters|
|CPU type||Atmega 2560 - r3, 16Mhz, 8-Bit , 256 Kbytes program memory, 4KBytes EEPROM memory, 8KBytes SRAM|
|Motor resolution||1.8° / step|
|Motors dimensions (L, W, H)||Nema 17|
|Motor weight||0.4 KG / Motor|
|Motor lead wires||4|
|Motors lead wire length||5 x 1m|
|Pulley types||GT2 2mm 16 teeth|
|Timing belt type||GT2 2mm|
|Mecanical resolution||X, Y Axis: 10 microns; Z Axis : 6.25 microns|
|Compatible slicers||Cura, Slic3r, MatterControl|
|System requirements||Windows 7 SP1, Open GL 2.1 , 2GB Ram|
|Firmware||Opensource Marlin Firmware (https://github.com/MarlinFirmware/Marlin)|
No customer reviews for the moment.
ADWIRE Filament PLA 1.75mm 1kg - Green
Parts for automatic power off of your reprap 3D...
ADWIRE Filament PLA 1.75mm 1kg - Black
ADWIRE Filament PLA 1.75mm 1kg - White
This cleaning needle will help you clean up...
This is a general maintenance pack for reprap...
This pololu A4988 stepper motor driver is...
3D Modular Systems Filament PLA 1.75mm 750gr -...