No products
-
Closed loop Nema 17 Motor+Driver kit (24V)
75,42 € 125,42 €
Large There are 11 products.
[135°C] Silicone heater 600W 220V 29x29cm...
Large silicone heater for RepRap 3D printers Material: Silicone Size: 290x290mm Power: 600W Input Voltage: 220V can reach 60°C in 1 minute 10 can reach 110°C in less than 3minutes Power supply cable length: 1 metre Back Tape: 3M Thermal fuse set at 140°C
50,83 €Out of stockFull aluminium plate kit (3mm thick) 33x30cm
Pack of 2 aluminum plates 3mm thick Laser cut 1 top plate (print surface) 330x300x3mm with 4 holes in the corners for screws1 bottom plate 330x300x3mm with 4 holes in the corners for screws 10 holes for bearing and belt supports
39,33 € 49,17 € -20%Reduced price!In StockPack heatbed for Scalar L 3D printer...
Heatbed Pack for Scalar L 3D printer Contains: 2 aluminum plates (3mm thick) laser cut with fixation holes 1 silicone heatter (600w-220V) 1 thermistor 1 static relay Free: 1 set of nuts and bolts: 4 spacers 4 conic head screws 4 nuts for conic screws 10 M6x12mm screws 20 M3 washers 10 nylstop nuts
112,49 €Available under 2 weeksset of screws for Scalar Aluminium heat bed
This kit is a pack of screws compatible with Scalar Aluminium heatbed plates It contains: 10 M3 Nylstop nuts 4 M4x25 conic head screw 4 Springs 4 M4 Nuts 10 M3x12 screws 10 M3 washers
4,87 €In StockTop aluminium plate for Scalar L 3D...
1 aluminum plates 3mm thick Laser cut 1 top plate 330x300x3mm with 4 holes in the corners for screws
25,27 € 31,58 € -20%Reduced price!In StockBottom aluminium plate for Scalar L 3D...
1 aluminum plates 2mm thick Laser cut 1 top plate 320x320x2mm with 4 holes in the corners for screws 4 central holes for holding system
16,67 € 20,83 € -20%Reduced price!In Stock[135°C] 220V Silicone heater 29x29cm for...
Large silicone heater for RepRap 3D printers, specially adapted for CR-10 3D printers Material: Silicone Size: 290x290mm Power: 600W Input Voltage: 220V Power supply cable length: 1 metre Back Tape: 3M Thermal fuse set at 140°C Dedicated holes for CR10 like heatbed
50,83 €In Stock[CR-10][135°C] 600W 220V heatbed upgrade
2 Review(s)Heat bed upgrade 220V / 600W for CR-10 3d printer can reach 60°C in 1 minute 10 can reach 110°C in less than 3minutes Built-in thermal protection (max 135 °C)
59,17 €In Stock[95°C] 220V Silicone heater 29x29cm for...
Large silicone heater for RepRap 3D printers, specially suited for CR-10 3D printers MAX 95°C Thermal fuse set at 100°C Material: Silicone Size: 290x290mm Power: 600W Input Voltage: 220V Power supply cable length: 1m Back Tape: 3M Dedicated holes for CR-10 like heat bed
32,50 €Out of stock[CR-10][95°C] 600W 220V heatbed upgrade
Heat bed upgrade 220V / 600W for CR-10 3d printer can reach 60°C in 1 minute 10 can reach 110°C in less than 3minutes Built-in thermal protection (max 95 °C)
40,83 €Out of stock[95°C] Silicone heater 600W 220V 29x29cm...
Large silicone heater for RepRap 3D printers Material: Silicone Size: 290x290mm Power: 600W Input Voltage: 220V can reach 60°C in 1 minute 10 can reach 110°C in less than 3minutes Power supply cable length: 1 metre Back Tape: 3M Thermal fuse set at 100°C
50,83 €In Stock
![[CR-10][135°C] 600W 220V heatbed upgrade](http://3dmodularsystems.com/2241-home_default/-cr-10-600w-220v-heatbed-upgrade.jpg "[CR-10][135°C] 600W 220V heatbed upgrade")
![[95°C] Silicone heater 600W 220V 290x290mm Scalar L & CR-10](http://3dmodularsystems.com/2290-home_default/-95c-silicone-heater-600w-220v-290x290mm-for-scalar-l-cr-10.jpg "[95°C] Silicone heater 600W 220V 290x290mm Scalar L & CR-10")
![[CR-10][95°C] 600W 220V heatbed upgrade](http://3dmodularsystems.com/2724-home_default/-cr-10-95c-600w-220v-heatbed-upgrade.jpg "[CR-10][95°C] 600W 220V heatbed upgrade")
![[95°C] Silicone heater 600W 220V 29x29cm](http://3dmodularsystems.com/2730-home_default/-95c-silicone-heater-600w-220v-29x29cm-for-scalar-l.jpg "[95°C] Silicone heater 600W 220V 29x29cm")