The lightest performing extruder on the market Geniune Extrudeur...
Hot end nozzle of 3D printers: Threading: M6 Nozzle diameter: 0.4mm...
Hot end nozzle of 3D printers: Threading: M6 Nozzle diameter: 0.4mm...
Extrusion Profile Spool Holder (3030) Ideal for Scalar M, L, XL, XL Premium
Heatbed Pack for Scalar L 3D printer Contains: 2 aluminum plates (3mm thick) laser cut with fixation holes 1 silicone heatter (600w-220V) 1 thermistor 1 static relay Free: 1 set of nuts and bolts: 4 spacers 4 conic head screws 4 nuts for conic screws 10 M6x12mm screws 20 M3 washers 10 nylstop nuts
High Helix lead screw Outter diameter min (d1): 9.9mm Outter diameter max (d1): 10mm Core diameter d3 min: 7mm Core diameter d3 max: 7.1mm Pitch: 25mm Pitch angle: 38.51° Number of threads: 8 Length: 530mm
Upgrade for Scalar L Compatible With Scalar L removes the use of driving belts Allows to increase bed accelerations Increased bed motion Removes belts elasticity/vibration Stainless steels lead screw and bearing Pitch 25mm
1 aluminum plates 3mm thick Laser cut 1 top plate 330x300x3mm with 4 holes in the corners for screws
1 aluminum plates 2mm thick Laser cut 1 top plate 320x320x2mm with 4 holes in the corners for screws 4 central holes for holding system
Easy to install compatible with most FDM 3D printers Pre-assembled kit, ready to work within 10 minutes
Top idler specially designed to prevent wobbling of the Z lead screws Compatible with Creality CR-10 and Anet E10 3D printers Also compatible with any 3D printers using 8mm lead screws and 2020 extrusion profiles
Large silicone heater for RepRap 3D printers, specially adapted for CR-10 3D printers Material: Silicone Size: 290x290mm Power: 600W Input Voltage: 220V Power supply cable length: 1 metre Back Tape: 3M Thermal fuse set at 140°C Dedicated holes for CR10 like heatbed
Large silicone heater for RepRap 3D printers, specially suited for CR-10 3D printers MAX 95°C Thermal fuse set at 100°C Material: Silicone Size: 290x290mm Power: 600W Input Voltage: 220V Power supply cable length: 1m Back Tape: 3M Dedicated holes for CR-10 like heat bed
Basic kit of plastic parts to assemble a Scalar L and Scalar XL Premium 3D printer
V-Slot Wheel pack, compatible with X and Y carriage of Scalar S / Scalar L and Scalar XL Premium