No products
Prices are tax included
Fan
New products
-
RRD Fan extender for dual extrusion
Required if using the power fan output to drive the 2nd hot end heater....
6,00 € -
![[S] Dual extrusion upgrade Chimera Plus for Scalar S](http://3dmodularsystems.com/2722-small_default/-s-dual-extrusion-upgrade-chimera-plus-for-scalar-s.jpg)
[S] Dual extrusion upgrade Chimera Plus for Scalar S
Dual extrusion upgrade kit Two inputs, two outputs. The classic...
149,90 € -
![[S] Enclosure with air filtration system for Scalar S](http://3dmodularsystems.com/2699-small_default/-s-enclosure-with-air-filtration-system-for-scalar-s.jpg)
[S] Enclosure with air filtration system for Scalar S
Modular enclosure for 3D Scalar S 3D printer The enclosure is installed...
249,00 € -
![[XLP] Enclosure with air filtration system for Scalar XL Premium](http://3dmodularsystems.com/2627-small_default/-xlp-enclosure-with-air-filtration-system-for-scalar-xl-premium.jpg)
[XLP] Enclosure with air filtration system for Scalar XL Premium
Modular enclosure for 3D Scalar XL premium 3D printer The enclosure is...
349,00 € -
chainable RGB led WS2812
Programmable and chainable RGBW LED module (same model used on Neopixel)...
1,20 € -
PLA Electronic box for MKS GEN 1.4 / MKS GEN L
PLA electronic enclosure for MKS GEN 1.4 / MKS GEN-L boards The...
25,00 €
Fan There are 10 products.
Subcategories
[15000Rpm] 40mm 12V DC fan 14.16CFM ultra...
DC Fan 40x40x10mm 12V DC Speed: 15000 (rpm) Current: 0.45A Air Flow: 14.16 (CFM) MTBF: 50000 Hours Air Pressure: 0.31 (In mmHO) Noise level: 39 dBA Wire length: 20cm Startup voltage: 4V Ball Bearing: yes dimensions: 40x40x10mm
9,10 €In Stock[6500RPM] 40mm fan 12V dc, 7.13 CFM
Silent fan 40mm 2 pins 12V 0.16A 20cm lead wires Brushless Speed: 6500 rpm MTBF: 50000 Hours Airflow: 7.13 CFM Air pressure: 0.16 In mmHO noise level: 27.6 dBA dimensions: (40x40x10mm) Ball Bearing: Yes startup voltage: 4VDc
5,52 €In Stock[ 3500RPM] 9733 12VDC brussless blower...
Main caracteristics: 12V, 0.52A Brushless Format: 9733 Dimensions: 97x94x33mm Speed: 3500 rpm ±10% Airflow: 28.3 CFM MTBF: 50000 Hours
7,80 €In Stock[3800RPM] 7530 12VDC brussless blower fan...
Main caracteristics: 12V, 0.31A startup voltage: 4V Brushless Format: 7530 Dimentions: 75x74x30mm Speed: 3800 rpm ±10% Airflow: 15.6 CFM MTBF: 50000 Hours Ball Bearings
6,50 €In Stock40mm fan 12V dc
Silent fan 40mm 2 pins 12V 0.1A 20cm lead wires Brushles dimensions: (40x40x10mm) Sleeve Bearing startup voltage: 4VDc
4,00 €In Stock[E3D]12V Spare fan for E3D hot ends
12V Spare fan for E3D hot ends.30x30x10mmdual ball bearing4.1 CFM
6,00 €[NOCTUA] Fan NF-A4X10 FLX, 40x40x10mm...
Fan Noctua NF-A4X10 FLX 3 pins 3700 / 4500 rpm 12V 40x40x10mm 17.9 dB(A)
14,50 €In StockNoctua NF-S12B redux PWM, 120x120x25mm...
Fan Noctua NF-S12B redux- 1200 PWM 4 pins 400/ 1200 rpm 12V 120x120x25mm 18.1 dB(A)
15,50 €In Stock30mm fan Guard Grid
Protection guard grid for 30x30mm fans compatible with E3D hot end fans
1,20 €In Stock4 cm Dust filter for 40mm fans
4 cm (40mm) dust filter for fans Comes with 3 parts The filter can be cleanes
1,10 €In Stock
![[E3D]12V Spare fan for E3D hot ends](http://3dmodularsystems.com/2174-home_default/-e3d-12v-spare-fan-for-e3d-hot-ends.jpg "[E3D]12V Spare fan for E3D hot ends")
![[NOCTUA] Ventilateur NF-A4X10 FLX, 40x40x10mm 4500/3700 rpm](http://3dmodularsystems.com/2477-home_default/-noctua-ventilateur-nf-a4x10-flx-40x40x10mm-45003700-rpm.jpg "[NOCTUA] Ventilateur NF-A4X10 FLX, 40x40x10mm 4500/3700 rpm")
