MKS SGEN 3D printer 32bits controler board LPC1769 Cortex-M3 32bits...
MKS SGEN L 3D printer 32bits controler board LPC1769 Cortex-M3 32bits...
Hot end nozzle of 3D printers: Threading: M6 Nozzle diameter: 0.4mm...
Stepper Motor Driver based on a Trinamic TMC2209 with soldered pin headers
Insert for M6 screws Sold by unit
Insert for M5 screws Sold by unit
Insert for M4 screws Sold by unit
Push to fit pneumatic straight connector for bowden type PTFE tubes. Compatible with 6mm tubes for 3mm filaments. Thread: 1/8 " BSPT Thread type: NPTF conical Quick connector Can handle up to 10 bars of pressure material: Acetal Certifications: FDA and NSF
DC Fan 40x40x10mm 12V DC Speed: 15000 (rpm) Current: 0.45A Air Flow: 14.16 (CFM) MTBF: 50000 Hours Air Pressure: 0.31 (In mmHO) Noise level: 39 dBA Wire length: 20cm Startup voltage: 4V Ball Bearing: yes dimensions: 40x40x10mm
MOSFET for 3D printers 12V / 24VDC heat beds Input voltage: 12/24VDC Max Currrent: 25A Max heat bed power: 200/250W You need to cool down the heatsink of the MOSFET before use Compatible with reprap, Creality CR-10, Anet E10, etc... model: MKS MOS25