No products
Prices are tax included
Soldes -10% There are 34 products.
BLTouch (Antclab) Geniun auto bed leveling...
Geniun Antclab BLTouch Auto bed leveling probe Work under 5V Compatible with RAMPS 1.4 board Can sens any build surface Cable length: 20cm, may require extender wires
47,65 €In Stock[6500RPM] 40mm fan 12V dc, 7.13 CFM
Silent fan 40mm 2 pins 12V 0.16A 20cm lead wires Brushless Speed: 6500 rpm MTBF: 50000 Hours Airflow: 7.13 CFM Air pressure: 0.16 In mmHO noise level: 27.6 dBA dimensions: (40x40x10mm) Ball Bearing: Yes startup voltage: 4VDc
5,52 €In Stock[15000Rpm] 40mm 12V DC fan 14.16CFM ultra...
DC Fan 40x40x10mm 12V DC Speed: 15000 (rpm) Current: 0.45A Air Flow: 14.16 (CFM) MTBF: 50000 Hours Air Pressure: 0.31 (In mmHO) Noise level: 39 dBA Wire length: 20cm Startup voltage: 4V Ball Bearing: yes dimensions: 40x40x10mm
9,10 €In Stock[ 3500RPM] 9733 12VDC brussless blower...
Main caracteristics: 12V, 0.52A Brushless Format: 9733 Dimensions: 97x94x33mm Speed: 3500 rpm ±10% Airflow: 28.3 CFM MTBF: 50000 Hours
7,80 €In Stock[3800RPM] 7530 12VDC brussless blower fan...
Main caracteristics: 12V, 0.31A startup voltage: 4V Brushless Format: 7530 Dimentions: 75x74x30mm Speed: 3800 rpm ±10% Airflow: 15.6 CFM MTBF: 50000 Hours Ball Bearings
6,50 €In StockIgus Drylin RJ4JP-01-08 Linear bearing
Igus Drylin RJ4JP-01-08 linear bearing in Polymere Iglidur J4 (japanese size) Has the same size and compatible with the commonly used LM8UU linear bearings Without balls, entirely in polymere, this component can work without any lubrification in dusty environment. Allows smooth movements and you won't loose any balls anymore!
2,40 €In Stock[3mm] Hexagone AO Hotend
Provided with 1 Nozzle (0.5mm) Nozzle Mounting / dismounting : 5 min. 1 kit, 8 assembly possibilities Compatible with 3mm filament Compatible with direct/bowden extrudeurs Can print PLA, ABS, Nylon, Laywood,etc... Jhead compatible groove Thermistor
57,60 €In Stock[1.75mm] Hexagone AO HotEnd 12V
Provided with 1 Nozzle (0.5mm) Nozzle Mounting / dismounting : 5 min. 1 kit, 8 assembly possibilities Compatible with 1.75mm filament Compatible with direct/bowden extrudeurs Can print PLA, ABS, Nylon, Laywood,etc... Jhead compatible groove Thermistor
57,60 €Out of stockFiltre anti poussière pour ventilateur de...
This dust filter is an easy, economic and easy to maintain solution to filter big and average dust particules that will stick on your equipments or electronic boards. Can easily be fixed on the input of any 80mm fan. The dust will stick on the filter grid by it's own. A small paper sheet can be used to clean the filter once in while.
1,00 €In StockExtruder compression spring
3D printer extruder compression spring Length: 20mm Outter diameter : 7.5mm Inner diameter: 5mm Spring wire diameter: 1.2mm Lap turns: 9
0,80 €In StockGT2 belt 2mm pitch, 6mm wide (sold by...
Reinforced GT2 belt, 2mm pitch for 6mm width Price per meter.
2,80 €In StockIGUS Bushing GSM-1012-20 for 10mm...
Igus Bushing Runs dry (no lubrifiant required) Hight abrasion resistance Insensible to dust or durt Economic Low noise Replaces LM10UU bearing in term of functionality
0,80 €In Stock
