E3D V6 - Block & sock upgrade kit

ECO-E3DV6-UPGRADE-KIT

New product

This is an upgrade kit for E3D-V6 hot end

It contains:

  •     V6 cartridge-style heater block
  •     Silicone Sock V6
  •     The new cartridge thermistor
  •     Thermistor cable
  •     Fixings

More details

This product is no longer in stock

25,00 € tax incl.

More info

This kit contains

Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Sock & Thermistor Cartridge Block. Read all about them in the Blog Post.

  •     V6 cartridge-style heater block
  •     Silicone Sock V6 (x3)
  •     The new cartridge thermistor
  •     Thermistor cable
  •     Fixings



  •     These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
  •     Made of a heat-resistant, non-stick silicone material that will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
  •     These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
  •     The covers simply push onto the front of the hotend with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly. The elastic material will fit all nozzle sizes in the range from 0.25mm to 0.80mm
  •     Socks don't last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100+ print hours. With less sticky materials like ABS and gentler use you can get almost infinite life. Your mileage may vary.

Reviews

Grade 
10/30/2016

Tres bon Update

acheté et reçu en 2 jours très bonne mise à jour pour la buse et surtout pour régler les soucies d'emballement thermique.
Les +
- pas de soudures à faire
- température constantes
- évite l’accroche du filament sur la buse

Les -
RAS :)

    Write a review

    E3D V6 - Block & sock upgrade kit

    E3D V6 - Block & sock upgrade kit

    This is an upgrade kit for E3D-V6 hot end

    It contains:

    •     V6 cartridge-style heater block
    •     Silicone Sock V6
    •     The new cartridge thermistor
    •     Thermistor cable
    •     Fixings

    Accessories

    Customers who bought this product also bought: