Warning: Last items in stock!
Volcano documentation can be found here.
From mid-June 2016 E3D Hotends will transition to using a standard cartridge-type format for temperature sensors. This means a new heater-block and thermistor cartridge will be supplied with the E3D-v6 as standard. For a full explanation read the sensor documentation page.
Everything you need to start exploring large format 3D-Printing! The Starter Pack is an add on for your E3D HotEnd to boost the speed of printing with vastly increased melt rates and epic layer adhesion. Another fun addition to the E3D ecosystem, and fully compatible with all E3D HotEnds except Cyclops.
The Starter Pack gives you an easy way to upgrade your HotEnd to use a high flow 0.80mm nozzle. This kit contains all the parts you need to upgrade your HotEnd to Volcano, including electronics and fixings.
An economical and simple way to get started with volcano.
Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need.
Volcano enables you to print at high layer heights, through large nozzles, and extrude much more plastic per second. This results in dramatically reduced print times.
In addition to reduced print time the large traces of filament printed by Volcano bond to one another with greatly improved strength. This results in parts that are extremely strong and feel much more solid than standard prints.
Printers are getting larger and the objects that can be printed are getting larger too. However, as prints get bigger the time taken to print these objects increases exponentially. Volcano makes huge printers viable, and manufacturing large objects much more efficient by slashing print times by more than half compared to standard printing.
By combining speed and strength Volcano makes it possible to print objects a whole new class of objects like shelf brackets, large scale RepRap machines, and even furniture.
Just because parts are printed with large layers doesn't mean that they are going to be inaccurate or ugly. To the contrary the large layers give a very smooth appearance, with great gloss. With a correctly calibrated machine you can stil hit part accuracies of +/- 0.1mm.
Further documentation can be found at wiki.e3d-online.com/wiki/E3D-v6_(Volcano)_Documentation
No customer reviews for the moment.
3D Modular Systems Filament PETG 1.75mm 750gr...
Perfect end stop for 3D printers type: SS-5GL2...
0.8mm Hot end nozzle for E3D Volcano 3D...
0.4mm Hot end nozzle for E3D Volcano 3D...
Strong mechanic Modular chassis Strong and...
1 249,99 €
The lightest performing extruder on the market...
3D Modular Systems Filament PLA 1.75mm 700gr -...
This is a general maintenance pack for reprap...