Igus Drylin RJ4JP-01-08 linear bearing in Polymere Iglidur J4 (japanese size)
Has the same size and compatible with the commonly used LM8UU linear bearings
Without balls, entirely in polymere, this component can work without any lubrification in dusty environment.
Allows smooth movements and you won't loose any balls anymore!
Warning: Last items in stock!
|10||2,10 €||Up to 3,00 €|
|20||1,90 €||Up to 10,00 €|
|50||1,60 €||Up to 40,00 €|
Without grease, precise, lightweight and quickly mounted.
These is the summary of this new iglidur® J4 bearing with japanese standard
In Ø 8 mm, this economic drylin® bearing is a great alternative in dry environement to the popular ball bearings used for 3D printers.
Dry alternative (without grease) to linear bearing with japanese standard (the most commonly used)
High life span
Quick mount, can be secured with side clips.
Lightweight and clean
Usage : 3D printers
Can we used with oil or grease wich increase the lifespan (already huge) of this bearing.
Iglidur® J4 is a new cheap material offering long life span when driving middle weight loads.
No lubricifacion needed nor any other maintenance required.
Cheap material for big manufacturing volume
Good resistance to chemicals
Very low Humidity absorption
|iglidur® J4 Datasheet|
|Humidity max absoprtion at 23°C and 50% H.R.||0,3 % of weight|
|Max water absoprtion||1,3 % of weight|
|Max usage temperature for continuous use||90°C|
|Max temperature for short period of use||120°C|
|Min usage temperature||-50°C|
|Module d'élasticité transversale||2.350 MPa|
|Max surface pressure||35 MPa|
|Inner diameter (mm)||8|
|Outer diameter (mm)||15|
|Working temperature and humidity||-50/+90°C|
No customer reviews for the moment.
Default 40W 12V Heater cartridge for RepRap...
MOSFET Transistor Compatible with RAMPS1.4 50...
This article contains: 1x Smart Adapter for...
Cutting pliers for electronic components...
Main caracteristics: 12V, 0.31A startup...
MK8 Direct Drive extruder wheel Inner...
This pololu A4988 stepper motor driver is...
M3x8mm screw White zinc steel Full thread...
4 pins Dupont housing connector Pitch: 2.54mm
12V 60mm fan, used inside Scalar 3D printers kit.