This upgrade intends to add a 2nd stepper motor on the Y axis.
This increase the stability of the belts of the dual drive system.
It also reduces the vibrations on the belts.
Warning: Last items in stock!
This upgrade intends to add a 2nd stepper motor on the existing Y Axis.
It allows to have 1 stepper motor at the front and at the back of the print surface.
Both motors are turning on the same direction
More over they are electrically links together on the same stepper driver.
This allows them to be perfectly in sync.
Both stepper motors are driving the belts in both directions.
The print surface is always perfectly pulled on both directions.
1 NEMA17 stepper motors compatible with Scalar 3D printers. Powerful, robust, with a nice capacity to stay cool thanks to it's 40mm high and limited 1.2A per phase; Uses only 1.2A for a 4000 g.cm torque (0.44 Nm ou 62 Oz.In)
No customer reviews for the moment.
Hot end nozzle of 3D printers: Threading: M6...
Gaz cartridge of type ABEK1P3 contains: 2...
The Scalar L, has a print volume of 300 x 300 x...
Tnut for 3030 aluminum extrusion with 8mm hole...
Blue rigid coupler Inner diameter 1: 5mm...
Control your 3D printer remotely with this...
This pololu A4988 stepper motor driver is...
1 NEMA17 stepper motors compatible with Scalar...
Bulldog type paper clips of 32mm long for 13 mm...
3D Modular Systems Filament PLA 1.75mm 750gr -...